Halloween 2013
I
remember when I found out I was pregnant, I thought about being one of
those moms that home made everything from scratch. That thought didn't
last long! I laughed at the very idea because I knew that I was far from
handy OR crafty. Well, look at me now!
There
were several posts on Pinterest with DIY Fix it Felix and a couple for
Wreck it Ralph but none that had everything I wanted to accomplish. I'm
going to try to break it down as best as I can since I didn't really
take pictures while I was making it. Please visit This Post to view DIY Wreck it Ralph.
Fix it Felix Jr.
Supplies and Cost
Fix it Felix was a cheap and easy DIY project but it was a bit tedious. The first thing I got was the shirt,
for $12 at Children's Place, and the boots were $10 at Walmart. I got
long sleeved because if it's cold I can roll the sleeves down. I figured
those items he'll be able to wear again as well! He already had jeans,
hammer, and the hat, which was a bit off color but I think it still
looks good. I bought a blue bandana from Hobby Lobby for 69 cents. The
belt buckle was about a dollar and the strap that I used for the belt
was a dollar a yard (I only needed 1 yard). I bought a canvas pouch that
would tie around the waist, also at Hobby Lobby, for $2. Finally, I got
a piece of yellow felt for 23 cents at Walmart, some white puffy paint
for $2, and gold spray paint for about $6. If you're still adding, I'll
help you out! That totals $34.92. If you exclude the fact that I would
have bought the shirt and boots anyway since he can wear them all
fall/winter, that's only 12.92!! This tiger costume I had considered is $37 on Amazon BEFORE shipping. I think I did pretty good!
How I did it
The hat: Felt
cut out the Fix it Felix logo (as best as I could!) hand sewn on in the
corners so I can later take it off and reuse the hat.
The belt: The belt was made from a strap I got at Hobby Lobby. All I did was attach the buckle by folding it around and under and hand sewing it in place. I made the hole where I wanted it using a small screwdriver. I then cut the pockets from the canvas pouch I got at Hobby Lobby. I cut them down a lot because the full sized pocket was way too big for his little legs! I sewed around the edge with a zig zag stitch to prevent fraying and sewed them in place on the belt. I also used an extra strip of the strap to make a hammer holder. I hand stitched it on but looking back, I could have done it much faster with the machine.
The patch: I typed up the font on the computer and printed it out. I then cut a single layer from the bandana. It is thin enough you can see the font through the bandana when you place the paper underneath. I didn't bother trying to trace it, I went straight at it with the puffy paint and it turned out GREAT! I then sewed the patch to a square of canvas (leftover from the pouch for the pockets). I sewed using a tight zigzag stitch and did it in the oval shape like I wanted. I didn't do it perfect. At all. I've only been sewing for about a month and usually straight lines. Don't stress over it. I then cut it out along the edge and hand sewed it on the shirt. I got lucky and had a thread that was EXACT to the bandana color so you couldn't see how little I actually sewed and how spacey it was. I wanted to be able to cut it off and reuse the shirt later.
The belt: The belt was made from a strap I got at Hobby Lobby. All I did was attach the buckle by folding it around and under and hand sewing it in place. I made the hole where I wanted it using a small screwdriver. I then cut the pockets from the canvas pouch I got at Hobby Lobby. I cut them down a lot because the full sized pocket was way too big for his little legs! I sewed around the edge with a zig zag stitch to prevent fraying and sewed them in place on the belt. I also used an extra strip of the strap to make a hammer holder. I hand stitched it on but looking back, I could have done it much faster with the machine.
The patch: I typed up the font on the computer and printed it out. I then cut a single layer from the bandana. It is thin enough you can see the font through the bandana when you place the paper underneath. I didn't bother trying to trace it, I went straight at it with the puffy paint and it turned out GREAT! I then sewed the patch to a square of canvas (leftover from the pouch for the pockets). I sewed using a tight zigzag stitch and did it in the oval shape like I wanted. I didn't do it perfect. At all. I've only been sewing for about a month and usually straight lines. Don't stress over it. I then cut it out along the edge and hand sewed it on the shirt. I got lucky and had a thread that was EXACT to the bandana color so you couldn't see how little I actually sewed and how spacey it was. I wanted to be able to cut it off and reuse the shirt later.
Only do one layer of paint.
(Doing more will cause it to remain tacky and not dry properly)
Don't paint it on a plate
(It will stick and pull off the paint which will make you do MORE layers)
Let it dry overnight before touching
(Or you'll get fingerprints)
Don't let them play with the hammer until halloween
(they'll pound the paint right off)
(Doing more will cause it to remain tacky and not dry properly)
Don't paint it on a plate
(It will stick and pull off the paint which will make you do MORE layers)
Let it dry overnight before touching
(Or you'll get fingerprints)
Don't let them play with the hammer until halloween
(they'll pound the paint right off)
Now,
with all that being said, I ended up having to buy another hammer and
start all over. Luckily, big lots had a tool kit for $7 which they will
play with again and again. This new hammer had a little hole in the
bottom and I put a small screwdriver in it to hold it while I spray
painted it and then blow dried it on low cool for about 10 minutes and
then propped it up to dry overnight.
Well,
I think that about covers it! I have decided against the gloves since
it'll be enough fight for him to keep the hat on and not throw the
hammer. I hope you all enjoy! Please visit This Link for Wreck it Ralph DIY.
No comments:
Post a Comment